Does anyone has experience with uart transmit interrupt handling.
I would like to send long string of data, but not more, then one
character per main loop execution.
Is there interrupt based chars sending ever possible ?
I experienced, that during chars sending nothing is run, except
other interrupts.
robert
There was a long thread on USART TX ints a while back (2 months?) in
the MSP430 Yahoo group.
I posted my Tx USART code, which used a method of controlling TXIE
that solved the problem(s) of the original poster.
Here it is: http://groups.yahoo.com/group/msp430/message/13559
I use it so serve up web pages over TCP/IP on the MSP430 -- so the
strings are quite long, and there are lots of other things happening
while the ISRs are active and sending data. tested at 9600 baud with
buffers ranging from 60 to 512 bytes.
--
______________________________________
Andrew E. Kalman, Ph.D.
Salvo(TM), The RTOS that runs in tiny places(TM)
Pumpkin, Inc.
750 Naples Street
San Francisco, CA 94112
tel: (415) 584-6360
fax: (415) 585-7948
web: http://www.pumpkininc.com
email: [email protected]
