I have a TI MSP-TS430DW28 development board I've been using off-and-on for a while now. If I place a MSP430f123 or MSP430f1232 in it and start msp430-gdbproxy I get a nice message identifying the chip and everything works well. Placing a MSP430f2131 in it, however, results in msp430-gdbproxy throwing out a message "error: msp430: Could not read device memory (6)".
Does anyone have an idea why this might be happening? I've checked all the supplies and everything seems good (and the OTHER processors work just fine). This is all under linux, if that makes a difference. Thanks! ************************************ This e-mail and any files transmitted with it are proprietary and intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender. Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Industries, Inc. The recipient should check this e-mail and any attachments for the presence of viruses. ITT Industries accepts no liability for any damage caused by any virus transmitted by this e-mail. ************************************
