I have the same problem with msp430-gdbproxy not seeming to know about the more recent family members, in my case the 2417. But I find that msp430-jtag works fine for programming the flash on this chip. I only use gdbproxy for debugging.
On Wed, 2008-10-01 at 08:07 -0700, douncon wrote: > Hi there, > > in this line (debug: MSP430_VCC(3000)) you are telling the flash tool to > supply 3 Volt to run the MSP but you probably have a PCB which is already > powered. > So all you have to do, is to tell your flash tool to output 0 Volt ... > something > like MSP430_VCC(0) .. > > > > sglow2000 wrote: > > > > Hi Guys; > > > > I hate to keep asking the same question, but I could really use a push > > in the right direction here. > > > > Can anyone tell me if the '2618 device is supported by any version of > > msp430-gdbproxy? > > > > I've tried the version on the sourceforge page, and also the version on > > soft-switch.org, but so far I consistently get an error when starting > > msp430-gdbproxy: > > > > --->msp430-gdbproxy msp430 /dev/ttyUSB0 > > > > Remote proxy for GDB, v0.7.1, Copyright (C) 1999 Quality Quorum Inc. > > MSP430 adaption Copyright (C) 2002 Chris Liechti and Steve Underwood > > > > GDBproxy comes with ABSOLUTELY NO WARRANTY; for details > > use `--warranty' option. This is Open Source software. You are > > welcome to redistribute it under certain conditions. Use the > > '--copying' option for details. > > > > debug: MSP430_Initialize() > > debug: MSP430_Configure() > > debug: MSP430_VCC(3000) > > error: msp430: External power detected (38) > > debug: MSP430_Identify() > > error: msp430: Could not find device (or device not supported) (4) > > debug: MSP430_VCC(0) > > debug: MSP430_VCC(3000) > > error: msp430: External power detected (38) > > debug: MSP430_Reset(ALL_RESETS) > > debug: MSP430_Close() > > msp430-gdbproxy: target_msp430.c:746: msp430_open: Assertion > > `!msp430_status.is_open' failed. > > Aborted > > > > Sorry if this is a dumb question, is it documented someplace that I'm > > missing? > > > > If this processor isn't supported, are there any plans to update > > gdbproxy to add support for it? > > > > How are people working with this chip if it's not supported by > > gdbproxy? I really just need to program the flash, I can live without a > > debugger if necessary. > > > > Thanks, > > Steve > > > > > > ------------------------------------------------------------------------- > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > _______________________________________________ > > Mspgcc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > > > > -- Peter Baxendale
