Hi Peter;
In the end, it turned out that my problem was that gdbproxy simply
doesn't support any of the newer devices under Linux. This is rather
disappointing to me, and a clear example of the problems with closed
source utilities.
I ended up getting gdbproxy working under a vmware virtual machine
running windows. I then ran gdb under Linux and connected via the
virtual network to gdbproxy. It's a bit of a convoluted solution, but
works and doesn't require a second box. I think someone else mentioned
that they had been able to do this under wine as well.
Rgds,
Steve
Peter Baxendale wrote:
I have the same problem with msp430-gdbproxy not seeming to know about
the more recent family members, in my case the 2417. But I find that
msp430-jtag works fine for programming the flash on this chip. I only
use gdbproxy for debugging.
On Wed, 2008-10-01 at 08:07 -0700, douncon wrote:
Hi there,
in this line (debug: MSP430_VCC(3000)) you are telling the flash tool to
supply 3 Volt to run the MSP but you probably have a PCB which is already
powered.
So all you have to do, is to tell your flash tool to output 0 Volt ...
something
like MSP430_VCC(0) ..
sglow2000 wrote:
Hi Guys;
I hate to keep asking the same question, but I could really use a push
in the right direction here.
Can anyone tell me if the '2618 device is supported by any version of
msp430-gdbproxy?
I've tried the version on the sourceforge page, and also the version on
soft-switch.org, but so far I consistently get an error when starting
msp430-gdbproxy:
--->msp430-gdbproxy msp430 /dev/ttyUSB0
Remote proxy for GDB, v0.7.1, Copyright (C) 1999 Quality Quorum Inc.
MSP430 adaption Copyright (C) 2002 Chris Liechti and Steve Underwood
GDBproxy comes with ABSOLUTELY NO WARRANTY; for details
use `--warranty' option. This is Open Source software. You are
welcome to redistribute it under certain conditions. Use the
'--copying' option for details.
debug: MSP430_Initialize()
debug: MSP430_Configure()
debug: MSP430_VCC(3000)
error: msp430: External power detected (38)
debug: MSP430_Identify()
error: msp430: Could not find device (or device not supported) (4)
debug: MSP430_VCC(0)
debug: MSP430_VCC(3000)
error: msp430: External power detected (38)
debug: MSP430_Reset(ALL_RESETS)
debug: MSP430_Close()
msp430-gdbproxy: target_msp430.c:746: msp430_open: Assertion
`!msp430_status.is_open' failed.
Aborted
Sorry if this is a dumb question, is it documented someplace that I'm
missing?
If this processor isn't supported, are there any plans to update
gdbproxy to add support for it?
How are people working with this chip if it's not supported by
gdbproxy? I really just need to program the flash, I can live without a
debugger if necessary.
Thanks,
Steve
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Mspgcc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mspgcc-users
