hi peter 2009/1/22 Peter Jansen <[email protected]>
> I have thought about doing similar, I had thought openocd ( > http://openocd.berlios.de/web/) would be a good starting point for doing > this. Openocd has all the JTAG driving routines and gdb protocol already > coded. > haven't heard about this, so i will take a look at it, thanks :-) > The only document from TI I have seen is the one ( > http://www.ti.com/litv/pdf/slaa149f), this is the document that is used to > implement msp430-jtag etc. This gives you memory read/write, flash > erase/write, and register read/write. > Just downloaded and seems complete in the first look, one more thing to queue! > So I have some code that will work with the three processors that I use: > > 149, 1611, and the 249. One can add ones own processor to this code if > > you can figure out the magic messages that are sent to initialize them. > > It would be nice if I could get all of the magic messages. > > Is that available, and which parts are still to be implemented. I'm afraid there was an error there, it wasn't me who said that actually, but it was from Kavaler's mail in october (which I read before joining the list), so he's got the answer to that, sorry for the mistake. Imanol
