Am 19.10.2010 14:55, schrieb Michael Heidinger: > I want to program a MSP430G2231. > Writing 124 bytes to e000... --> wrong adress?
yep. memory starts at 0xf800 on this chip. i'm using mspdebug 0.12 with a lauchpad kit with that chip, where it works quite well. though sometimes i need to unplug the kit to be able to connect again (it reports an error, but it does the same for the serial port too.) and for the cpu support, you can compile for a f2012, which is basically the same chip. just note that the "value" part has only the 1Mhz clock calibration values in flash while the F20xx has also higher frequencies available there. chris ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ Mspgcc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mspgcc-users
