Hi,
my fault was a currupt elf-File. (Wrong adresses were specified). Now it 
works fine... Thank you for your hints!

Thanks cris for your workaround with mspgcc. That works fine. But it 
would be very great if the mspgcc would be supported as real controller, 
not just a workaround, as this controller is very popular.

Michael

On 10/20/2010 03:43 AM, Daniel Beer wrote:
> On Wed, Oct 20, 2010 at 02:20:59AM +0200, Chris Liechti wrote:
>    
>> i'm using mspdebug 0.12 with a lauchpad kit with that chip, where it
>> works quite well. though sometimes i need to unplug the kit to be able
>> to connect again (it reports an error, but it does the same for the
>> serial port too.)
>>      
> Hi Chris,
>
> I'm hoping that I've fixed this problem with a recent change:
>
>      commit 9956ecadb56a606b9822af9792ac952e54fa38dc
>      Author: Daniel Beer<[email protected]>
>      Date:   Sat Oct 16 17:26:58 2010 +1300
>
>       fet: retry with reset on connect if the first attempt fails.
>
> Have you tried the latest git version? Did this problem ever occur with
> version 0.11?
>
> - Daniel
>
> ------------------------------------------------------------------------------
> Download new Adobe(R) Flash(R) Builder(TM) 4
> The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
> Flex(R) Builder(TM)) enable the development of rich applications that run
> across multiple browsers and platforms. Download your free trials today!
> http://p.sf.net/sfu/adobe-dev2dev
> _______________________________________________
> Mspgcc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>
>    


------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly 
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
_______________________________________________
Mspgcc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mspgcc-users

Reply via email to