Thanks! But, are those values the same across all devices? Or calibrated just after fabrication? --------------------------------------- Sergio Campamá sergiocamp...@gmail.com
On Nov 8, 2011, at 7:04 PM, Peter Bigot wrote: > See http://www.43oh.com/forum/viewtopic.php?f=10&t=239 > > Peter > > On Tue, Nov 8, 2011 at 3:58 PM, Sergio Campamá <sergiocamp...@gmail.com> > wrote: >> Hi, >> >> Are CALDCO and CALBC1 supposed to be set when the micros are shipped? I've >> been testing some msps (z1 zolertia nodes), and they appear to be erased >> (only 0xff for every calibration register).. Is there anyway to restore >> those values? Not to the ones from factory, but maybe I could calibrate >> them and store the corresponding values? I tried naively to set them >> directly, but the compiler says they're read only. >> >> Thanks! >> >> -- >> -------------------------------------- >> Sergio Campamá >> sergiocamp...@gmail.com >> >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Mspgcc-users mailing list >> Mspgcc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/mspgcc-users >> >> ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
