Hi, Are you sure that your RAID backplane is still good?
Darrin Carter CNE, MCP+I, MCSE, CCA Senior Systems Engineer Elegrity, Inc. 415.821.0900 (main) 415.826.7758 (fax) 415.726.0413 (direct) e-mail: [EMAIL PROTECTED] http://www.elegrity.com -----Original Message----- From: Martin Blackstone [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 29, 2001 9:12 AM To: MSWinNT Discussions Subject: RE: Replacing drive on Raid 5 You are pretty much Fsk'd when you have 2 drives in a RAID5 array go bad. Replace all the drives, restore from backup. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Brett Wesoloski Sent: Thursday, November 29, 2001 9:12 AM To: MSWinNT Discussions Subject: Replacing drive on Raid 5 Well I have another question today. Here is the problem. Three drives. 1 - good 1 - Bad 1 - Goes bad after a couple minutes on start up. I tried to replace the bad one. I put in the new drive used create a spare. It started to transfer the data and then the one that goes bad went bad. Now the new drive I put in says bad right away. I am using Adaptec ci/0 management software. Version 4.01 Any idea's on what I can do. TIA, Brett ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED] ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED] ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
