Hi,
Thanks for your reply..
Well this brings me to a new question... The SCC and the MusicModule don't
have this problem. So they have something in them that avoids/solves this
problem. So can't I simply modify the FMPAC in someway instead of having to
do some soldering in my MSX ? I now know that pin 49 on the cartridge does
the soundoutput. So it would be logical if I could do a modification to the
FMPAC instead. Anybody who can give more exact details ?
----- Original Message -----
From: "Hans Otten" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: dinsdag 28 maart 2000 10:41
Subject: RE: Adding resistor to FMPAC for use with a NMS 8250
> Elco is a capacitor (or condensator in dutch). (electrolytische
condensator)
> The plus/minus is clearly marked on the housing. And no it is NOT a
> resistor, nor does a resistor have a plus/minus side.
>
> Buy those 2 elco's (een paar dubbeltjes) and replace the resistors as
marked
> on the motherboard.
Grtzzzz Roel...
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
