> It sounds like the 1st HD has termination and the interface can't see the
> 2nd HD. Make sure the interface and the last HD on the chain are
terminated
> and everything in the middle isn't.
>
> Termination is usually a jumper, or an array of resistors which are easily
> removed/replaced.
I welll that's not so true. after termination the bus is not completly
closed so that no signaals can get true.
Its is only a little bit weaker.like:in between a interface and HD(1) is
like 2 meters of cabel.
And HD1 is terminated.is hd(2) within 0.5 it's not a probleem. if it is
longer than it's a probleem.
Mine theory is that the scsi bios (eproms) in the unit's are different.
i have make't an order by hans oranje (http://www.hansoranje.demon.nl) for a
new slot expander and a new scsi interface.
so if i get a new BERT scsi interface the first thing a am going to do is
copy the eprom :-) en test it in mine
MK scsi interface.because i am maxout at 4x32MB and can't use any other
fdisk then Fdisk 1-1.
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
