Afaik MSX 1 BIOS only requires 16kB of RAM, and an engine to take care of several things. Oh, and a VDP, ofcourse. The BIOS will not work without it, even if it were only for the interrupt it generates.
I think an MSX2 has basically the same requirements. Since there is an MSX2 model without a mapper (VG8220?) I don't think the mapper is a necessity. ~Grauw --- Ushiko-san! Kimi wa doushite, Ushiko-san nan da!! ----- Original Message ----- From: "Jun Sung Kim (???)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 04, 2003 7:06 AM Subject: [MSX] minimum hardware configuration > > Hi again, > > I'd like to know what is the minimum configuration of hardware > for MSX BIOS to run. > > For example, > > If I have an existing MSX(2) BIOS ROM and have a strange board > which has a Zx80, a RAM (whether mapper or not), a PPI and a VDP, > can I expect MSX logo on screen? > > This question is the same as the reset status :) > > Greetings from a lazy guy who don't want to read BIOS ^^ > > - Jun. > > > > > _______________________________________________ > MSX mailing list ([EMAIL PROTECTED]) > Info page: http://lists.stack.nl/mailman/listinfo/msx > _______________________________________________ MSX mailing list ([EMAIL PROTECTED]) Info page: http://lists.stack.nl/mailman/listinfo/msx