If memory serves well, you should press DEL or some key to bypass CF bootup
and boot normally from diskette. With the fdisk you should do the
partitioning and then all should work normally.

Greetings
    Maico Arts
    MSX-NBNO

----- Original Message ----- 
From: "Javi Lavandeira" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 27, 2004 3:42 AM
Subject: [MSX] IDE-CF: "No enough memory"


> Hi all,
>
> I received today my IDE-CF, but I'm having some trouble with it. The
> problem is that if I boot the computer with a memory card in the master
> slot, the computer always hangs with the following error: "No enough
> memory". These are the things I've found out:
>
> - Booting the MSX without a memory card inserted, the interface's BIOS
> says that it cannot find a master device and the computer boots normally.
> - Booting with a memory card in the master slot, I get the "No enough
> memory" error message in a FS-A1ST (expanded to 512Kb) and a FS-A1GT.
> I've tried also an FS-A1WX (64Kb) and I don't get the error message, but
> the floppy disk in this computer is broken, so I couldn't do more testing.
> - Flashing the BIOS works correctly when I boot the computer without a
> memory card.
> - The "No enough memory" error appears regardless of the slot where the
> cartridge is inserted.
>
> My hardware is:
>
> - Panasonic FS-A1ST (512Kb)/A1GT/A1WX
> - CF ATA-IDE, BIOS 2.21
> - 128Mb CF card (detected as "TOSHIBA THNCF128MA" at boot)
> - Nothing else connected to the computer
>
> Any ideas on what can be causing the problem?
>
> Regards,
>
> PS: I posted this same message on Sunrise's forum too.
>
> --
> Javi Lavandeira - http://www.ag0ny.com
> _______________________________________________
> MSX mailing list ([EMAIL PROTECTED])
> Info page: http://lists.stack.nl/mailman/listinfo/msx
> --
> This message was sent with an unlicensed evaluation version of
> Novell NetMail. Please see http://www.netmail.com/ for details.
>
>


--
This message was sent with an unlicensed evaluation version of
Novell NetMail. Please see http://www.netmail.com/ for details.
_______________________________________________
MSX mailing list ([EMAIL PROTECTED])
Info page: http://lists.stack.nl/mailman/listinfo/msx

Reply via email to