Thanks for the FAST reply :) But... I missed some descriptions...
I have _used_ HDD with Sunrise ATA-IDE on the MSX2+ in serveral years. One day, that did not work... Of course I have an enough memory (1MB memory mapper) and MSX-DOS2... All other cartridges work fine (Or just seem to be fine...) execept ATA-IDE. Most important fact is that "ATA-IDE not detected - flash loader cannot find that" Again, ATA-IDE is detected on other MSX2 machine. I believe that my F1XV has a hardware problem.. somewhere in expansion slot logics... Greetz, Jun ----- Original Message ----- From: "Kim Daniel" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, November 01, 2005 9:06 AM Subject: RE: [MSX] Why Sunrise ATA-IDE I/F does not work? > >From: Jun Sung Kim \(・\x80・\x80・ア\)<[EMAIL PROTECTED]> wrote : > >Hello! > > Heya > > >Many years ago, my MSX2+(Sony F1XV) was partially broken... > >It seems that some signals of expansion slot does not work.. > > I have MSX 2+ Sony HB F1 XV too. > But now it's in Japan.. I need bring it back later.. > > >The Facts are: > > > >1) ROM cartridge works > >2) MoonSound works > >3) ATA-IDE not detected (Detected on MSX2, Daewoo) > > cause Sony HBF1XV has 64kb RAM only > You need expand RAM and B-DOS 2 ROM (MSX-DOS 2 cart) for your MSX. > > >Maybe, someone can answer this. > > I did it. > Good luck > > >Greeting from Korea, > >Jun. > > > _______________________________________________ > MSX mailing list ([email protected]) > Info page: http://lists.stack.nl/mailman/listinfo/msx >
_______________________________________________ MSX mailing list ([email protected]) Info page: http://lists.stack.nl/mailman/listinfo/msx
