Thanks Karsten, maybe I would give it a try but it is obvious I can't do anything if I don't have apdu debugging so I could see what is being sent to the card. Can you tell me how can I enable this on Windows (if this is possible)?
dejan > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Karsten Ohme > Sent: Tuesday, August 08, 2006 3:04 PM > To: MUSCLE > Subject: Re: [Muscle] PKCS#11 troubleshooting > > Gambin Dejan wrote: > > OK, then in shortly, if I want to use musclecard framework > on my 2.2 > > javacard (JCOP41, new JCOP31, etc) to be able for example to > > sign/encrypt email messages, do a web authentication or > possibly sign > > a OpenOffice document (if this is supported) I have to use ALL the > > stable muscle libraries (libmusclecard, pkcs11, mcardplucgin, > > mcardapplet) to get it to work? > > Yes. Or you must find the buggy things in the PKCS#11 module. > This can be some work. You must obey this, if you want to > update the PKCS#11 module: > > http://web.inf.tu-dresden.de/~ko189283/MuscleCard/libmusclecar > dChanges.html > > Maybe it is not as much work as you may think (you can assume > some standard answers for a quick and dirty solution, e.g. > token can only RSA ... a complete PKCS#11 implementation > could be much more pain.) > > Yes, the new things can do some things, which haven't been > possible before, e.g elliptic curves. It would be nice to see > it all together working, but my current plan are to lift up > libmusclecard to a good middleware for many different tokens > with better possibilities than > PKCS#11 and a Microsoft CSP, at the moment it is too specific. > > Karsten > > > > > The thing is, I will hold a seminar on the next smartcard > conference > > in september, about the JavaCard (especially JCOP) > > development&integration, and I would very much like to present the > > MuscleCard project and to have a "working" example on using the > > musclecard on my JCOP card with "higher level" applications. I hope > > that is possible, I wanted to try your new versions since > it had some > > new possibilities and I thought this was better choice for > JavaCard 2.2 smartcards like JCOP41. > > > > Besides, there is a MuscleCard applet support for OpenSC recently > > developed so I thought this could maybe be an interesting thing to > > present too... > > > > Anyway, thanks very much Karsten > > > > dejan > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] > >>[mailto:[EMAIL PROTECTED] On Behalf Of > Karsten Ohme > >>Sent: Tuesday, August 08, 2006 1:47 PM > >>To: MUSCLE > >>Subject: Re: [Muscle] PKCS#11 troubleshooting > >> > >>Gambin Dejan wrote: > >> > >>>Hi, > >>> > >>>I am trying to use the newest PKCS#11 (developer version) > >> > >>module with > >> > >>>the newest Muscle libraries. Since it doesn't work for me > >> > >>in Mozilla, > >> > >>>I would like to troubleshoot it and I have a few questions: > >>> > >>>1. I can add the PKCS#11 module in Mozilla but I can't do anything > >>>with it after that... during the PKCS#11 module loading in > >> > >>Mozilla, my > >> > >>>PKCS11.log file has been filled with some error messages > that could > >>>point to the cause of the problem: > >> > >>The PKCS#11 modules work (?) only with the normal libmusclecard and > >>MCradPlugin and CardEdgeApplet. From the error log I > assume, that you > >>are using maybe my versions. > >>There is no updated PKCS#11 module for this. > >> > >>Karsten > >> > >> > >>>... > >>>08/08 13:20:26 Slot 1 changed > >>>08/08 13:20:26 +slot_DisconnectSlot : start > >>>08/08 13:20:26 -slot_DisconnectSlot : end RV(0x0) > >>>08/08 13:20:26 Attempting establish > >>>08/08 13:20:26 Establish connection > >>>08/08 13:20:26 Begin transaction: 1, rv=0 > >>>08/08 13:20:26 (..\src\p11x_msc.c 200): error: 0x9C0F "Invalid > >>>parameter" > >>>08/08 13:20:26 (..\src\p11x_slot.c 975): error: 0x9C0F "Invalid > >>>parameter" > >>>08/08 13:20:26 (..\src\p11x_slot.c 580): error: 0x9C0F "Invalid > >>>parameter" > >>>08/08 13:20:26 Error (..\src\p11x_slot.c 581): > >> > >>MSCGetCapabilities failed > >> > >>>08/08 13:20:26 End transaction: 1, rv=0 > >>>08/08 13:20:26 (..\src\p11_general.c 117): error: 0x32 > >>>"CKR_DEVICE_REMOVED" > >>>08/08 13:20:26 -C_Initialize : end RV(0x0) ... > >>> > >>>I don't know if those errors are important anyway (I have > read that > >>>CKR_DEVICE_REMOVED error is normal the first time it is > looking for > >>>the reader?). But after that it returns 0 mechanisms, no supported > >>>functions listed etc... > >>> > >>>If anyone has a suggestion on where to look or where to start > >>>troubleshooting, I would appreciate it very much. I even > don't know > >>>how to enable apdu logging (maybe this could help me diagnose the > >>>problem)...I am working on Windows... > >>> > >>>thanks very much > >>> > >>>dejan > >>> > >>>_______________________________________________ > >>>Muscle mailing list > >>>Muscle@lists.musclecard.com > >>>http://lists.drizzle.com/mailman/listinfo/muscle > >> > >>_______________________________________________ > >>Muscle mailing list > >>Muscle@lists.musclecard.com > >>http://lists.drizzle.com/mailman/listinfo/muscle > >> > > > > > > _______________________________________________ > > Muscle mailing list > > Muscle@lists.musclecard.com > > http://lists.drizzle.com/mailman/listinfo/muscle > > _______________________________________________ > Muscle mailing list > Muscle@lists.musclecard.com > http://lists.drizzle.com/mailman/listinfo/muscle > _______________________________________________ Muscle mailing list Muscle@lists.musclecard.com http://lists.drizzle.com/mailman/listinfo/muscle
