2009/12/17, Michael StJohns <mstjo...@comcast.net>: > Easy way to tell - boot up your machine under 2K, then go into the hardware > manager and look at the properties page for the smart card reader. That > should have both the vendor name and the vendor and product ids for the > device. > > You're probably right though... which basically means you're out of luck > given the various folks who have tried to find data on this chipset going > back to 2006. > > I *think* the smart card stuff is attached off the SDIO bus (in W2k device > manager - view by connections) which means the CCID stuff in PCSCD isn't > going to be helpful - you're going to need a device specific driver. > > Later, Mike
Well, there is not so much information available in Windows: - Device: RICOH SmartCard Reader - Manufacturer: RICOH Company, Ltd - Location: CardBus Slot 0 - Driver date: 09/03/2007 (I don't know if it is 9th of March or 3rd of September, sorry) - Driver version: 1.8.0.1 - Driver files: C:\WINNT\system32\DRIVERS\rismc32.sys - Interrupt request: 19 - Input/Output range: DFF0-DFFF - Memory range: FFEFD000 - FFEFDFFF Regards, Andrey
_______________________________________________ Muscle mailing list Muscle@lists.musclecard.com http://lists.drizzle.com/mailman/listinfo/muscle