I've just decided to give it a whirl from my Windows box, since I have been
unable to get it to work from my Fedora 8 server, but have thus far been
unsuccessful from either. I did manage to get it to load the Hauppauge GUI
from Windows, but this is what I get from my Fedora box when trying to load
the newest stable MediaMVP MC:
Dec 25 03:11:43 server mvpboot[3514]: sending mvpboot reply packet to
192.168.1.101:16882
(seq=1 id1=fafe id2=babe hwaddr=0015f245811b client_addr=3232235877
client_port=2048 guiserv_addr=3232235827 guiserv_port=5906
conserv_addr=3232235827 conserv_port=6337 serv_addr=3232235827
serv_port=16886)
But, then nothing from TFTP. I however proved that it was working on both
ports, like so:
Dec 24 23:24:15 server xinetd[2126]: START: tftp pid=2954 from=192.168.1.55
Dec 24 23:25:51 server in.tftpd[2985]: RRQ from 192.168.1.55 filename
dongle.bin.ver
Dec 24 23:27:07 server xinetd[3005]: START: tftp pid=3009 from=192.168.1.55
Dec 24 23:27:07 server in.tftpd[3010]: RRQ from 192.168.1.55 filename
dongle.bin.ver
Dec 24 23:42:07 server xinetd[3005]: EXIT: tftp status=0 pid=3009
duration=900(sec)
After sitting at the Contacting Servers screen for a while, it will only go
to the Failed to Locate GUI Server screen, unless I have both services
running under Windows. Any ideas? This thing is going to drive me batty.
Thanks,
Jameson
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Mvpmc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mvpmc-users
mvpmc wiki: http://mvpmc.wikispaces.com/
