> Yes - modules are loaded. If I point the StreamZap at the IR receiver > irw gives me info. If I point the Hauppage at the IR receiver irw > prints nothing. > > Please be aware that I'm very green with this stuff so possibly I'm > not doing something right, but that's what I see. >
If you're not sure about your lircd.conf file you could look at the remotes.tar.bz2 file here: http://www.lirc.org/index.html This contains a whole bunch of lircd.conf files, one of which is a generic RC-5 one which, if I understand correctly contains all the RC-5 codes (PVR350 uses RC5). What I did, when I wanted to use a universal remote with my Hauppauge PVR350 was: 1. use the above file as my /etc/lircd.conf 2. run irw 3. press each key on my remote and note the keycode generated by irw. 4. where different keys gave the same code then I remap one of them to an unused code. 5. modify the lircd.conf example supplied by Jarod in his univeral remote howto to use the button names on my remote and the codes generated by irw. http://wilsonet.com/mythtv/remotes.php 6. modified Jarod's lircrc example to use the button names used in my new lircd.conf file. Hope this helps, and many thanks to Jarod for providing the clues to this process in his excellent site. _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users