Michael T. Dean wrote: > Mario Limonciello wrote: > >> I Have a PVR250-MCE in my machine and have been using ivtv 0.3.3y >> for quite some time without a hickup. Recently I updated to a current >> CVS and just today realized that I'm unable to tune higher channels (as >> in the 70s or so), and that I just get this error message spit out in my >> face in dmesg: >> >> Jun 28 10:37:28 supermario tuner: TV freq (0.06) out of range (44-958) >> >> >> I thought perhaps something when wacky with the tuner module, so I >> downloaded a more recent version of ivtv (0.3.6s) and updated - same >> problem. >> >> >> Has something gone into recent CVS that I have missed requiring me to >> change a particular setting? >> >> > Sounds like you're specifying a tuner type in your module options. > It's impossible to tell for sure what's going on without more > information. In your logs you'll see: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version x.x.x (xxxx) loading > ivtv: Linux version: x.x.xx > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > > (hint, hint) > > Mike > _______________________________________________ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > I checked and wasn't specifying a tuner type, but I am autodetecting and letting it get the appropriate type for my card (47). ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (s) loading ivtv: Linux version: 2.6.11-gentoo-r6 gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 7356645 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x008d1598, Rev ision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x00, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jun 28 2005 10:30:07 ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 6747, itv = 0xffffffff88112160 ivtv: ivtv_enc_vbi_thread: pid = 6748, itv = 0xffffffff88112160 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ====================
Oddly enough, I just had an unrelated nvidia xid so I had to reboot. After the reboot this started to work fine again. My only worry now is a recoccurrence. I have had this box working fine since Jan or so this year and nothing of the such ever happened. _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
