On 9/20/05, Uwe Schmidt <[EMAIL PROTECTED]> wrote:
On my system there is a message like
2005-09-19 23:51:28.962 taking too long to be allowed to read..
2005-09-19 23:51:28.962 Took more than 10 seconds to be allowed to
read, aborting.
Couldn't read file: rbuf://127.0.0.1:6543/tmp//ringbuf1.nuv
2005-09-19 23:51:28.997 Changing from None to WatchingLiveTV
2005-09-19 23:51:28.998 Decoder not alive, and trying to play..
2005-09-19 23:51:29.973 RemoteFile::Read() failed in RingBuffer::safe_read().
but this could probably be a problem with some rights, as Jochen pointed out. I will try to increase the backend verbosity level.
In your case I would also try to unload the DVB related modules and load them again with rmmod and modprobe (if they are not compiled in the kernel), before the reboot. I will see how it will work for me...
Could you please send me your complete mythconverg db dump on my email? I just want to be sure that my problems are not caused by wrong database data. Btw., is your dvb_pids table empty as well? The channel table contains only service IDs. Don't you know where are the video, audio and videotext PIDs saved? But I will see it from your db dump...
Thank you!
Bob
I used .18 and .18.1 along with DVB-S on ASTRA, both did the job.
Technotrend and Skystar cards.
But, when I start mythbackend and mythfrontend on the same system, I
sometimes get the same logentries, and the backend says something like "DVB0
no data from card...". Do you have the same ? Only a reboot fixed the
problem then, restarting myth does not.
On my system there is a message like
2005-09-19 23:51:28.962 Took more than 10 seconds to be allowed to
read, aborting.
Couldn't read file: rbuf://127.0.0.1:6543/tmp//ringbuf1.nuv
2005-09-19 23:51:28.997 Changing from None to WatchingLiveTV
2005-09-19 23:51:28.998 Decoder not alive, and trying to play..
2005-09-19 23:51:29.973 RemoteFile::Read() failed in RingBuffer::safe_read().
but this could probably be a problem with some rights, as Jochen pointed out. I will try to increase the backend verbosity level.
In your case I would also try to unload the DVB related modules and load them again with rmmod and modprobe (if they are not compiled in the kernel), before the reboot. I will see how it will work for me...
If you need a db-dump, write an email. I will provide you a complete db of
my production box.
Could you please send me your complete mythconverg db dump on my email? I just want to be sure that my problems are not caused by wrong database data. Btw., is your dvb_pids table empty as well? The channel table contains only service IDs. Don't you know where are the video, audio and videotext PIDs saved? But I will see it from your db dump...
Thank you!
Bob
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
