Well, the "c" key will swtich between inputs on one card. The "y" key will switch cards entirely.
Unfortunately, I have not personally dealt with a system where different tuners were used for different channel ranges, so I don't have more insight. --- Myth Monkey <[EMAIL PROTECTED]> wrote: > Hi.. Im trying to build a myth-tv system that has a satellite box > connected > to a pvr-250, and has a usb digital terrestrial receiver. > Individually I can > get either to work fine, but when I add both cards to myth using > mythtv-setup, I end up only being able to watch channels from the > first > defined card. > > A few more details: the satellite box has its uhf modulated output > connected > to the pvr-250's tuner [fixed as channel 47], and myth uses a command > line > util to drive an ir thingy to change the channels on the receiver. > The card > is configured within myth to have a selection of channels available > from a > video source etc, and all works well if this is the only card > configured. > > The usb dvb-t device is receiving the local digital terrestrial > broadcast, > and has its channels configured, there are no duplicate channels > between the > pvr250 and the dvb-t. This also works fine, if it is the only card > configured. > > When both cards are added, and their sources & channels all added to > myth, > the first card defined 'wins' and although the channels from the > second card > show up in the epg, they are not selectable by entering their channel > no. > The 'c' key which seems to be configured to toggle the tuner inputs > causes a > momentary pause in the video, but then it just resumes on the current > channel.. enabling channel navigation from the epg doesnt help > either, it > wont entering a no for a channel not on the first defined card does > not > switch the channel to it. > > I've had a good search and found other people reportedly having myth > working > with similar configurations of pvr250/dvb-t, so I guess I've just > gone wrong > somewhere.. > > Can anyone help me work though fixing this? Where should I start > looking ? > mythbackend / mythfrontend dont seem to be reporting any obvious > errors to > the console.. [all based from knoppmyth r5a16] > > Thanks in advance, > MythMonkey _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users