If you say 'yes' to the question at the start about clearing your capture cards, then you'll lose everything you have set up so far.
So, step 1 - back up your mysql table! (if you haven't done this already). I haven't read back in the log, but back up your tables!!
step 2 - Using mythtv-setup, go to menu option 2 - capture cards. Is your HD3000 listed as a DVB device, v4l device, or hd3000 device? I didn't have any luck with hd3000, and v4l will give you NTSC. Try removing it (highlight and press d) and re-adding as a DVB card. You may need to stop mythbackend. By default, mythbackend will lock DVB cards open.
once you've done that, you should be able to go into the channel editor & do a scan.
On 11/29/05, Brad Fuller <
[EMAIL PROTECTED]> wrote:
Mercury Morris wrote:
> As I re-read this thread, there is something missing:
>
> Brad, you say you "created a HD3000 card in mythtv-setup and assigned
> it to bcast." I asked about that before, but didn't see any answer.
Oh.. I merely meant that I created a a Video Source called "terrestrial"
using the Channel Freq Table of; us-bcast.
>
> So, here's a question: Did you complete a successful scan of
> available channels during mythtv-setup?
It's greyed out. Is it grayed out because I chose "no" at the beginning
of mythtv. I just didn't want it to change anything since I didn't want
what I had corrupted. Would it?
> And another question: Did you choose to define the HD3000 card as a
> DVB card (part of Input Connections)?
There is no "DVB" setting in Input Connections. My Input Connections
assigns the Capture Device (card) and Input to the Video Source (which
is "terrestrial" as cited above)
>
> Under Channel Editor (part of mythtv-setup) you can scan for channels,
> actually you must scan for them or else MythTV won't work.
hmmm... I guess I have to say YES to the question:
"Would you like to clear all program data and channel settings..."
at the beginning. Shessh.. I don't want to mess up what is alread there.
Will it?
>
> So, I apologize for the questions, but I just wanted to be sure that
> the setup steps have all been completed. Otherwise, we aren't all on
> the same page trying to figure out what's going wrong.
>
> --
> MM
>
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
