sorry, 1 more file, this is the spreadsheet I used to figure it out.. I really wish I would learn to write more comments, but maybe it'll make sense to you now that you are into it.....
On 12/28/05, Dave Hofstra <[EMAIL PROTECTED]> wrote: > I did this! I dont have the xbox hooked up anymore, but here are some of > the files I had left from the project.... I think I compared efc codes > from > keymaster with the lircd.conf, and could pretty easily figure out the > correct hex code--> lircd.conf code for each additional key I wanted... > Something I could just list in a spreadsheet side by side and guess the > correct hex code that would correspond with the lircd.conf number... > > Hope this helps, it's been a while, at least it should get you on the > right > track... works great for me... > > > the keymapmaster file is from 8.24 if you cant find it I can send it to > you.. > > > > > > > > On 12/28/05, CTD <[EMAIL PROTECTED]> wrote: > > > > Hello there, > > > > Curious if anyone had reprogrammed a JP1 capable remote, such as the One > > For All URC-6131n, to provide for more keys than is on the original > > Microsoft Remote. Using remote code 0522, I can easily get all the > > original xbox buttons duplicated, but I hoped for more functionality. > > > > I think I can figure out to program the remote, but my main question is > > how to configure lircd by updating the lircd.conf file. Specifically, > > how does one determine the hexadecimal data value for a new button > > that was not originally on the Microsoft remote? For instance when I > > run irw and press normal xbox remote keys programmed into the universal > > remote, I can see that lirc sees all the keys which were mapped in the > > lircd.conf file. But for enhanced keys that I want to use, irw does not > > output anything as I expected since there are no key-values pairs in the > > lircd.conf file. > > > > I started down the path of attempting to run irrecord, but I get the > > following error: > > #xbox:~# irrecord test > > #irrecord - application for recording IR-codes for usage with lirc > > #Copyright (C) 1998,1999 Christoph Bartelmus( [EMAIL PROTECTED]) > > #irrecord: could not init hardware (lircd running ? --> close it, check > > permissions) > > > > I verified that lircd is running. I figured I would ask for some help > > after investing several hours. > > > > > > Any help would be appreciated. > > > > Thanks > > Mike > > _______________________________________________ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > >
figureoutthekeysinorder.xls
Description: MS-Excel spreadsheet
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users