I spent most of last night looking through the list archive and googling but still can't make headway with my setup. If I missed something please feel free to tell me to RTFM, as long as you point me to the FM.
I'm setting up 0.18.2 on FC4 using an Nvidia 5200-based card and an HD3000 with an OTA antenna. The system is an Athlon 1700+ with 512MB of RAM and the latest FC4 kernel and nvidia drivers. I followed Jarod's FC how-to and I have myth installed and configured but a couple of things are still wrong. After a reboot I have to manually modprobe cx88-dvb then chmod /dev/dvb/adapter0/* so that the mythtv user can read the video card. (The latest HD3000 firmware is being loaded.) Once I do that, if I tell myth that the card is a standard v4l it'll pull in stations but the quality is far worse than with a TV hooked up to the same line. It won't let me do a channel scan when set as a standard v4l card and the audio is often out of sync with the video. When I set the capture card type as dvb it'll do a channel scan and find plenty of channels and they do come in very clearly, but they stutter a lot even though the CPU load is only about .75 and there is at least 100MB of free RAM. But it doesn't find most of the standard channels that come in (albeit fuzzy) in V4L. Also, the audio that comes through the HD3000 when in V4L mode isn't there in DVB mode. No TV audio comes out of the sound card, a chaintech 7.1, though Linux is able to use it just fine. It's possible that myth is sending the audio to the S/PDIF port but I haven't had a chance to check that yet. Any pointers or help would be greatly appreciated. -- -Jason ----- Jason K. Schechner --- There are no ABSOLUTE STATEMENTS I'm very probably wrong. --- "The difference between genius and stupidity is that genius has its limits." - Albert Einstein _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users