What's the netblock and ASN you already have?
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
> Edward W. Ray
> Sent: Wednesday, November 02, 2005 2:50 PM
> To: nanog@merit.edu
> Subject: Using BGP to force inbound and outbound routing through
> particular routes
>
>
>
> spam was a lousy name...
>
> -----Original Message-----
> From: spam [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, November 02, 2005 11:44 AM
> To: 'nanog@merit.edu'
> Subject: FW: Using BGP to force inbound and outbound routing through
> particular routes
>
> I recently made a request to get a cable modem connection at
> my home. I
> went for one of those $29.95 for three month specials in case
> I run afoul of
> some rules prohibiting what I am going to do. I already have
> a multi-T1
> connection with a Class C block and BGP running on my Cisco
> 3640 router, and
> was looking to become multi-homed. The cable connection is
> via bridge/DHCP
> cable modem, and was going to hook it up to the Cisco 3640.
> I have already
> done the research and know from what block of IP addresses I will be
> assigned, and the BGP route tables/peers.
>
> I would like to use BGP to force inbound and outbound routing
> only through
> particular peers, Sprint (AS 1239) and UUNET (AS 701). I
> have been reading
> "Practical BGP" by Whate, McPherson and Sangli and this appears to be
> possible. However, do my adjacent routers need to support
> BGP in order for
> this to work? Could I use other routing protocols to
> accomplish this, or
> would this require knowledge of all possible downstream
> router IP addresses?
>
> Edward W. Ray
>
>
>