Myth Busters proved that turning the lights off is more cost efficient than
leaving them on.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message -----
From: "Robert Bonomi" <[EMAIL PROTECTED]>
To: <nanog@merit.edu>
Sent: Saturday, March 31, 2007 11:41 PM
Subject: Re: PG&E on data centre cooling..
Date: Sat, 31 Mar 2007 19:31:53 -0700
From: Jay Hennigan <[EMAIL PROTECTED]>
Subject: Re: PG&E on data centre cooling..
John Kinsella wrote:
> I sorta wonder why the default is lights on, actually...I used to
> always
> love walking into dark datacenters and seeing the banks of GSRs (always
> thought they had good Blink) and friends happily blinking away.
Consider the power consumption per square foot of the gear in a typical
data center, then add in the power needed to keep it cool. I suspect
that the cost of energy to keep the lights on will be down in the noise.
In addition,
1) if the lighting is 'already there', figure the cost of re-wiring
to 'sensor-based' switching. The parts aren't terribly expensive,
but consider the amount of labor required. Particularly if the
desired
switched lighting 'zones' don't match the existing circuit wiring.
Don't forget the maintenance costs, either. You're probably going
to have to replace bulbs more frequently -- on/off cycles _are_ added
'stress' on bulbs.
2) if it is new construction, figure the differential cost in parts,
labor, *and* maintenance, of sensor-based lighting switching. This
is lower than 1), but still 'non-trivial'.
Now, estimate how much energy will be saved, and how long it will take for
that savings to pay back the cost of the investment.
"Secondary" savings from reduction in HVAC load? How many KW/sq.ft. does
the gear eat? vs. how many watts/sq.ft for lighting? ['Office grade'
lighting is under 2 watts/sq.ft. (and may be significantly less) using
conventional fluorscents, high-intensity halogen can be lower.
'Residential
level' general lighting can easily be under 1 watt/sq.ft.]
It's not like you're going to reduce the load enough to shut down one of
the chillers. :)
