On 05/30/2019 03:40, Jérôme Nicolle wrote:
What I have in mind is actually to combine line-rate ODUs with a static
mapping and pipe the uncommitted capacity to a packet-switch.
Statically commited services will be muxponded in fastpath, hence no
jitter and less latency, while the fractionnal ports use the remaining
ports, mostly for low-priority IP traffic.
Now I was assuming ODUFlex in CBR mode would allow fractionnal services
without packet switching, but mapping an ethernet service to it would
require some equivalent glue logic I guess, specifically for this case :
I see what you're getting at. It sounds like you want to light up a
100Gb wave, put some committed "dedicated wavelength" services on it,
then take whatever's left and hand it off on 100GbE for
best-effort/general Internet traffic.
Not a bad idea. I guess the idea would be to dynamically provision a
FlexODU or something for the remaining bandwidth and switch the Ethernet
traffic onto it encapsulated in GFP-F. I see no reason why this isn't
possible, but I know of nothing that would do it.
So someone needs to make a box with a couple QSFP+ (breakout capable), a
couple SFP+, a QSFP28 UNI for the 40/100GbE with subrate commit, and a
QSFP28 NNI to speak OTU4 into the network that supports all that.
Let me know if you find it! :)
--
Brandon