I’ve used this guy a couple times, Use your favorite switch/POE switch and viola PON network using switches. Pretty sure it doesn’t work with Zhone… But Zhone is #88 in my list of PON vendor choices ;) https://supportforums.adtran.com/docs/DOC-8697
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Ben Cannon Sent: Tuesday, December 11, 2018 2:11 PM To: Nick Bogle Cc: nanog@nanog.org Subject: Re: A few GPON questions... Rip it out. Where are your splitters? You can probably fix this with PoE 8-port switches and UPS-es. Every day you wait will cost more. You will never get 25 years out of this, I predict 6mos and then you rip it completely and put in copper/IDFs. -Ben On Dec 11, 2018, at 1:04 PM, Nick Bogle <n...@bogle.se<mailto:n...@bogle.se>> wrote: Unfortunately management didn't want an apple to apple comparison. They wanted a comparison to how it was spec'd out originally not how we typically deploy it now. I don't think this is a deal breaker for my job, we have 50+ buildings left to manage, and our contractor is responsible for maintaining it for the most part for the next year at minimum. The previous management (CIO/CTO/their assistants) were pretty much fired over this fiasco. New management is much better to deal with. On Tue, Dec 11, 2018 at 12:35 PM Alfie Pates <alfie@fdx.services<mailto:alfie@fdx.services>> wrote: >The cost analysis was already done. >Costs were not factored in for BBUs on every ONT like should have been spec'd >out for emergency phone lines. These two things do not quite agree. Update your CV - It is not your responsibility to shoulder the stress of your superiors' bad decisions, especially if you have no room to learn from those mistakes. ~a