On 2009-11-11 19:05, Roger Marquis wrote: > Keith Moore wrote: >>> Can you tell us what network gear passes SCTP without NAT but drops it >>> when NAT is enabled, or is this a rhetorical argument? >> >> any IP router. > > Any router? Router? When was the last time anyone implemented NAT on a > router? NAT is a firewall technology, not a router technology.
I'm not an expert on all products, but Google quickly found me this: http://www.cisco.com/en/US/docs/security/asa/asa80/asdm60/user/guide/fwmode.html "This chapter describes how the firewall works in each firewall mode. To set the mode at the CLI, see the "Setting Transparent or Routed Firewall Mode at the CLI" section on page 3-4. This chapter includes the following sections: •Routed Mode Overview •Transparent Mode Overview Routed Mode Overview In routed mode, the security appliance is considered to be a router hop in the network. It can use OSPF or RIP (in single context mode). Routed mode supports many interfaces. Each interface is on a different subnet. You can share interfaces between contexts. This section includes the following topics: •IP Routing Support ..." Brian _______________________________________________ nat66 mailing list [email protected] https://www.ietf.org/mailman/listinfo/nat66
