Not really necessary but means he has 4 cylinders (with holes) rather than only 2 (without holes) Would be a shame to see the rest go to waste. AND\OR Tim you could always fit 2 ends with holes to a cylinder, at least it's symetrical, just hate to see things go to waste.
Will I have been looking on ebay (UK) lately, there are always some old bakelite radios going cheap that would make some great cases, even cooler if the (Valve) radio works too, Lots do! Also look in the 'collectables-radio & telephony' sections, in fact any collectables section have some decent 'boxes' that with a bit of imagination could make a cool nixie case. Dave. On 4 Feb, 18:22, will <ossumguyw...@gmail.com> wrote: > Got your email. It looks great! Get back to me with a price if you > can, I think it's just large enough to hold my circuit boards. > Also, I agree, the cap with the hole in it could be good to use for > wires and stuff, but it's not really necessary. > > On Feb 4, 10:13 am, Lucky <dave.lucky.po...@gmail.com> wrote: > > > Hey Tim here is the simplest way to reduce file size using windows: > > Open your file (picture) then click 'save as' this will give you the > > option to reduce the quality therefore file size of your picture. Hope > > that helps. > > I would also be very interested in one of these cylinders. Why not > > keep the ends with the piston shaft hole? That end could be used, > > maybe fitting a switch or used as a cable entry, certainly worth > > keeping\using. How large is the hole by the way? I would guess no more > > than 20mm or am I looking at this wrong lol. > > Where are you in this big wide world by the way? > > Dave. > > > On 4 Feb, 11:17, lai...@wcoil.com wrote: > > > > Failed the first time message too large google 4 meg limit. So only > > > sending one picture. I need to find out how to reduce the file sizes. As > > > I don't need the resolution of my 10 megapixel camera. Tim > > > > > I sent this out to William. I though the rest of the group might be > > > > interested? > > > > > Hi sorry for the delay in replying. I got the 4 cylinders out of the > > > > trash and took them apart. I saved the endbells without the hole for the > > > > piston rod. So I have enough parts to make 2 enclosures using the > > > > original endbells. ID is 63mm or 2.5 inches stroke is 90mm Center > > > > extrusion measures about 5.6 inches Endbells add about 1.375 on each > > > > end. > > > > This darn program lost my first message so this is the second attempt. > > > > > Tim Laing > > > > IMG_0501.JPG > > > 2171KViewDownload -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
