On Dec 2, 2011, at 10:17 PM, Dylan Distasio wrote: > I was actually interested in hearing how people were driving both VFDs and > numitrons,
Numitrons are easy, there are a variety of LED and relay driver type chips that will drive them just fine. The current-controlled LED driver chips will make your numitrons last longer by giving a soft turn-on. However, if you care to multiplex numitrons, you have to add diodes to avoid crosstalk and ghosting. Small ones like an IV-9 can be directly driven by many microcontrollers. There are two main ways to drive VFDs. In industrial settings, the filament is held at a negative voltage (20-50V) and segments and anodes are pulled "up" to ground to light them. In the hobby world, it seems to be more common to run the filament at ground (or a little above, to provide solid turn-off), and pull grids and segments up to a positive voltage (also 20-50V). In either of these lashups, there are a variety of approaches. You can use all-in-one chips, or you can use whatever logic chips you want (such as simple shift registers), connected to driver chips that do the voltage translation. There are a wild variety of choices in the latter case, but it does involve more chips and wiring. - John -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
