i built an old digitalclock in the 70's or 80's andf have a question about the display which needs to be replaces.
it is a cherry w06-0001 gas discharge display which is burning out after many years of usage. i like this clock so i would like to keep it going even though the technology is ancient. so my questions are: 1: does anyone have a spec sheet or pinout for this display. i can trace digits and segments but there is a bunch of other stuff i don't understand yet. 2. what about a pin compatible or almost pin compatible replacement display. i bought a pinball display but it has more pins and there is no pin out similarity in the two displays. 3. does anyone know how to convert a gas discharge display to an led display. i pretty much figure that the power supply needs to be changed to a 12 volt supply and that the driver ic's also need to be changed. but not sure of anything of that. the clock ic am mk50252 doesn't care what it is driving. i realize this a really old display with no current support on the web or from the successors of cherry so whatever info i get here, if any, is my last stop. thanks -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
