Ok you got me. Should know but what is CP/M?
________________________________ From: threeneurons <threeneur...@yahoo.com> To: neonixie-l <neonixie-l@googlegroups.com> Sent: Wednesday, December 28, 2011 9:57 PM Subject: [neonixie-l] Re: FS: Shameless Plug Time - Dekatron Spinner Kits On Dec 28, 7:32 pm, Michail Wilson <micha...@aol.com> wrote: > Does the kit work with 6802? > > Sent from my iPhone > Yes, it does. If look towards the end of the page, you'll see a spot on the board that's to hold two 8 pin connectors, J2 & J3. If left alone, the connections between these two, are "pre-wired" for the OG-4. The connections are made thru "vias" (feedthru holes). That "pre- wiring" can be disconnected by drilling out the plating inside those connecting "vias". Then you can reconnect J2 to J3 according to the tube type you have. The connections for a 6802 (same as a GC10B, GC10/4B, & Z303C), are shown in a couple of those drawings. BTW: that via/feedthru "jumper" trick goes back to the 70's, and was common on older computer boards. Mostly pre-IBM PC. Yes, there were PCs before IBM. Can anyone say CP/M ? -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.