Hi,
this is probably not the answer you are looking for: but since it is a
microcontroller clock, why dont you change the pin assignments in the
source code?
Jens
I am hoping someone here might be able to steer me to the right
product. I am putting together another Sven! clock kit and it uses the
Standard ZM series like the Z570M or the Tesla ZM1082T.
I want to use and have ordered the Telefunken ZM1212 tubes (awesome
looking tubes) Pic here:
http://static.twm-kd.com/twm-uploads/300px-ZM1210-operating_edit24.jpg for
the next clock. The issue that I have is that the pin out on these is
almost a mirror of the other tubes, so i have to cross over most of
the leads to make this happen.What I am looking for is a clear
insulating product like a heat shrink tubing to keep the leads from
touching and yet let the LED floor lighting show through properly. I
am open to any ideas you guys might have on this?
Thanks in advance
Keith
--
You received this message because you are subscribed to the Google
Groups "neonixie-l" group.
To view this discussion on the web, visit
https://groups.google.com/d/msg/neonixie-l/-/6ZK697jpQt8J.
To post to this group, send an email to neonixie-l@googlegroups.com.
To unsubscribe from this group, send email to
neonixie-l+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/neonixie-l?hl=en-GB.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To post to this group, send an email to neonixie-l@googlegroups.com.
To unsubscribe from this group, send email to
neonixie-l+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/neonixie-l?hl=en-GB.