I found solutions to those problems myself. You can find those solutions yourself.
On 3/11/16 12:39 AM, vfdclock wrote:
I am trying to design a cheap NIXIE watch etc.,have checked a few exist design,and currently seems http://www.cathodecorner.com/nwl/nwld-mod-top.jpg looks not bad,and the circuit is easy for us to do.and I have few questions about the component if the guys who have already had the watch like this ,hope can answer my questions. Acoording to the pic,the socket of the tube in the pic looks like a regular 2.0mm female pin socket,would please confirm it,because we have tried, it seems the legs can be installed tightly inside the regular 2.0mm squire pin socket.Any suggestions? And seems with a USB socket on the side is not a good design,that hard to do the waterproof,if we design the outside power pins under the bottom of the PCB and connect with the pins under the watch case ,will be good?(may need extra special wire for cherging) Or if have any more suggestions please sya it out. Best reagrds.
-- David Forbes, Tucson AZ -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/56E2DF99.9080009%40dakotacom.net. For more options, visit https://groups.google.com/d/optout.
