On 2020-05-14 11:35 AM, newxito wrote: > There is a schematic of a high voltage supply (350V, 1.2mA) in the > LT1308 datasheet, so maybe you can modify the circuit (FB voltage
The problem with a lot of datasheet designs is that the transformers are long unobtainable. (Also I don't see that circuit in the LT1308 datasheets that are online.) If you want a quick solution, there are a LOT of simple, cheap DC supplies covering this range on ebay: e.g. https://www.ebay.ca/itm/High-voltage-power-supply-module-kit-DIY-for-Nixie-tubes/261169220982 at < US $8 each --Toby > divider resistors ) to get 170V at 2.5mA, that should be enough current > for one 1N16. > If you need more current, have a look at the LT3757 in flyback mode. > > -- > You received this message because you are subscribed to the Google > Groups "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to neonixie-l+unsubscr...@googlegroups.com > <mailto:neonixie-l+unsubscr...@googlegroups.com>. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/41554687-014e-4f4b-bc08-1f46f7b6812c%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/41554687-014e-4f4b-bc08-1f46f7b6812c%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/a0a23d28-315f-4789-4e46-b0fcff094b04%40telegraphics.com.au.
