Yep. That case is based on an established construction technique. I don't have space in my head for all the learning that goes with 3D printing! Richard
On Tue, 10 Nov 2020, 16:17 Nicholas Stock, <nickst...@gmail.com> wrote: > Richard, looking at your clock case on a regular monitor now makes me > suggest you buy a 3D printer....won't need so many curved spacers for the > edges then.... :) > > Cheers, > > Nick > > On Tue, Nov 10, 2020 at 7:58 AM Richard Scales <scales...@gmail.com> > wrote: > >> Actually, I now see that the SP-353 had a decimal point so these could be >> used as separators, yep two displays, six digits, time, date, temp, >> pressure, ntp sync, all possible. >> Richard >> >> >> On Tue, 10 Nov 2020, 15:51 Richard Scales, <scales...@gmail.com> wrote: >> >>> This design would not suit our at all. However, my other design that >>> uses direct drive would be well suited. >>> The SP-353 has three digits and no colons so that's 21 segments per >>> display. If you want a six digit clock then that would be easy with a >>> couple of HV5622 shift registers. Unfortunately it would be difficult to >>> have colons where you'd want them. If you used three displays then one >>> digit could be used as a colon. You'd need 63 outputs, how convenient, that >>> still leaves one spare! >>> So that's a definite possibility and you'd have a spare output that >>> could be used for something else perhaps. >>> Would that work for you? >>> Richard >>> >>> >>> On Tue, 10 Nov 2020, 15:27 alb.001 alb.001, <alb....@sympatico.ca> >>> wrote: >>> >>>> How difficult would it be to redesign the display boards to us >>>> SP-353 3-digit panaplex displays ? I still have some of those >>>> >>>> Thanks Pharma Phil >>>> >>>> ---------- Original Message ---------- >>>> From: Richard Scales <scales...@gmail.com> >>>> Date: November 10, 2020 at 10:10 AM >>>> >>>> Thank you. I have a Heathkit clock that needs some assistance. It does >>>> everything it should do apart from increment the time. The clock chip is >>>> driving the displays so I'm thinking it's OK but it just won't count time. >>>> I wasn't thinking of offering a kit but if anyone has a set of SP-101's >>>> then I can help out with Pcb's for this version as well as another one that >>>> I hope to have ready soon. >>>> Richard >>>> >>>> >>>> On Tue, 10 Nov 2020, 14:11 martin martin, < mcvei...@gmail.com> wrote: >>>> >>>> Your clock looks great! I'm currently fixing this 1970s Heathkit with >>>> an overheating power transformer. >>>> >>>> And yes! I would be interested in a kit >>>> >>>> >>>> >>>> ~ >>>> *mcvei...@gmail.com <mcvei...@gmail.com>* >>>> >>>> >>>> On Tue, Nov 10, 2020 at 6:04 AM Richard Scales < scales...@gmail.com> >>>> wrote: >>>> >>>> I could make plans available, or all hinges on having the displays. >>>> The rest of just smart sockets albeit ones I made work for these 7 >>>> segment displays. >>>> I have another design which is a direct drive approach and is therefore >>>> much simpler in terms of hardware whilst the software has to do a lot more >>>> of the heavy lifting. >>>> I'll show that when ready. I'm just waiting on updated pcb's to arrive. >>>> Richard >>>> >>>> On Tue, 10 Nov 2020, 13:58 Michail Wilson, < m...@michail.com> wrote: >>>> >>>> Love it. >>>> >>>> >>>> >>>> Plans, Open source, only one or making a kit available? >>>> >>>> >>>> >>>> Michail Wilson >>>> >>>> 206-920-6312 >>>> >>>> >>>> >>>> *From:* neonixie-l@googlegroups.com <neonixie-l@googlegroups.com> *On >>>> Behalf Of *Richard Scales >>>> *Sent:* Tuesday, November 10, 2020 1:39 AM >>>> *To:* neonixie-l <neonixie-l@googlegroups.com> >>>> *Subject:* [neonixie-l] SP-101 Clock, finshed at last! >>>> >>>> >>>> >>>> I've finally completed this: Six SP-101 panaplex displays being driven >>>> by 'smart sockets' which are getting their instructions from a Teensy >>>> Micro. >>>> >>>> >>>> A Wemos provides NTP sync, sensor reading (temperature and pressure) , >>>> Web scraping (local wind speed and direction) and random words. >>>> >>>> >>>> It does the best it can with only 7 segments. Also includes microwave >>>> motion detection so the thing is only displaying data when there is someone >>>> there to see it! >>>> >>>> >>>> I got green pcb's so the case is especially tinted to match. >>>> >>>> >>>> - Richard >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/4eb4cac2-d704-4464-8789-f13d1491b881o%40googlegroups.com >>>> <https://groups.google.com/d/msgid/neonixie-l/4eb4cac2-d704-4464-8789-f13d1491b881o%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "neonixie-l" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/neonixie-l/l9hzbmAmbnY/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB3435BA7FADF3ECBE89602C1482E90%40MW2PR0102MB3435.prod.exchangelabs.com >>>> <https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB3435BA7FADF3ECBE89602C1482E90%40MW2PR0102MB3435.prod.exchangelabs.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s_XAK3Ae94SfkOM_5woKdpGyoKkuX%2B0px5BUs4eYvH8fw%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s_XAK3Ae94SfkOM_5woKdpGyoKkuX%2B0px5BUs4eYvH8fw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "neonixie-l" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/neonixie-l/l9hzbmAmbnY/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/CAKYv7NSU6dMJzM6zbQkUo6EVpnxfuPTQ1kdZo%3D3oWjEmsTmYkg%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/neonixie-l/CAKYv7NSU6dMJzM6zbQkUo6EVpnxfuPTQ1kdZo%3D3oWjEmsTmYkg%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s-8j45qAknMFPD1xqSpMihDir6o3oUEE6tNrZ1V2bRd8Q%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s-8j45qAknMFPD1xqSpMihDir6o3oUEE6tNrZ1V2bRd8Q%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "neonixie-l" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/neonixie-l/l9hzbmAmbnY/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> neonixie-l+unsubscr...@googlegroups.com. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/1054268543.3832339.1605022049295.JavaMail.open-xchange%40mtlgui04 >>>> <https://groups.google.com/d/msgid/neonixie-l/1054268543.3832339.1605022049295.JavaMail.open-xchange%40mtlgui04?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+unsubscr...@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s9OB65HYu9YfJZXZWCraCFuGGV%2BGf09piYLo5fvsTmSGQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s9OB65HYu9YfJZXZWCraCFuGGV%2BGf09piYLo5fvsTmSGQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "neonixie-l" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/neonixie-l/l9hzbmAmbnY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > neonixie-l+unsubscr...@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/CAOX%2BRHJ3TZMTy8MJP%2BrnDOF3PRYvashMstFqYCk_rBq2_2H4Yw%40mail.gmail.com > <https://groups.google.com/d/msgid/neonixie-l/CAOX%2BRHJ3TZMTy8MJP%2BrnDOF3PRYvashMstFqYCk_rBq2_2H4Yw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CA%2B9r3s8_hKDGvug2nn2oRZKR-424a3w3%3DT1q6BO1iJQpqc%3DF%2BA%40mail.gmail.com.
