I’m down for two, more if it can be a generic data receiver and display, I have been wanting something like that, Burroughs nixie based for a long, long time.
Sent from my iPad > On Dec 17, 2020, at 08:24, Peter Doroba <peter.dor...@gmail.com> wrote: > Any luck moving the remaining merch? :-) > > On Saturday, December 5, 2020 at 10:07:20 PM UTC-5 Peter Doroba wrote: >> Okay, count me in for a board. Good luck with the training! Seems we're >> into the same things just in different order. I'm working on learning >> microcontroller programming and PCB design. >> >> Pete >> >> On Saturday, December 5, 2020 at 9:39:29 AM UTC-5 Mahdi Al Husseini wrote: >>> Hi, Peter, very cool! I have my commercial and instrument ratings in rotary >>> aircraft (and am working on my commercial multi engine FW). Possibly ATP >>> one day - we’ll see! >>> >>> Yes, all of what you are requesting can be done seamlessly, though it >>> requires a wifi network that you can connect to, to be available. Shouldn’t >>> be a problem if you live at an airport! >>> >>> I have one other interested individual, but need one more in order to make >>> putting another batch in worthwhile (the $300 cost is near production cost, >>> so it’s a loss if I can’t sell at least of four of five). I will let you >>> know if that happens by email >>> >>> Thanks! >>> >>> Mahdi >>> >>> On Sat, Dec 5, 2020 at 8:37 AM Peter Doroba <peter....@gmail.com> wrote: >>>> Great! I'd likely take you up on the code help offer. I did start out as >>>> an EE major in college but switched to Aeronautical Science when I got the >>>> flying bug. :) I'm a Spirit Airlines Captain and live on an airport so >>>> the the METAR/TAF feature really speaks to me. LOL Maybe a silly question >>>> but the board can display the current date and time correct? Can it be >>>> configured to display both local and UTC in turn? Also, how often is the >>>> WX data displayed? Thanks! >>>> >>>> Pete >>>> >>>> On Friday, December 4, 2020 at 10:49:02 PM UTC-5 Mahdi Al Husseini wrote: >>>>> Yes of course! Currently, it will immediately select the closest airport >>>>> based on longitude and latitude data, but it is very easy to adjust the >>>>> code to select a particular airport ID. I can help with that as needed. >>>>> The current code for TAF/METAR is attached for reference. If purchased, I >>>>> will adjust the code slightly, to support the ESP32 on the new boards. >>>>> >>>>> On Fri, Dec 4, 2020 at 9:55 PM Peter Doroba <peter....@gmail.com> wrote: >>>>>> I'd be interested! Is the METAR and TAF feature standard? I assume the >>>>>> airport ID is customizable? >>>>>> >>>>>> On Friday, December 4, 2020 at 8:51:43 PM UTC-5 Mahdi Al Husseini wrote: >>>>>>> Hi all, >>>>>>> >>>>>>> I am thinking about producing another batch of five B7971 >>>>>>> clocks/displays (without tubes), and would like to know who might be >>>>>>> interested. >>>>>>> >>>>>>> Video of the clock/display in action: B7971 Dustoff IoT Board - YouTube >>>>>>> >>>>>>> These new boards are outfitted with the improved ESP32s instead of >>>>>>> ESP8266s. This is my last run of B7971 boards for the foreseeable >>>>>>> future. The cost would be $300 + shipping. >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>>> Mahdi >>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "neonixie-l" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to neonixie-l+...@googlegroups.com. >>>>>> To view this discussion on the web, visit >>>>>> https://groups.google.com/d/msgid/neonixie-l/6a88f5f0-ed20-40b6-9689-1fcfd0708719n%40googlegroups.com. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to neonixie-l+...@googlegroups.com. >>> >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/5246c9b6-d214-4953-b2a2-ebe72e873548n%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/820db3cf-6643-45c0-9838-eb724f6c207bn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/A8EC282B-D232-4CB8-AE6C-4B1E1C663B4C%40degeere.com.
