Sorry about that... I have a Series 1.
Thanks, Tom -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ike Zimbel Sent: Thursday, October 09, 2008 2:55 PM To: [email protected] Subject: Re: NEOTEK: Panning Issues Hi Tom, Do you have an Elite or Elan? Anyway, if you do, which pan are you talking about? The "E" consoles have a known problem with the track and Aux A/B pan pots. If it's one of those, carefully re-solder all six leads and the problem should clear up. Note to everyone: Please identify your console at the start of your e-mail. Best, Ike Tom Gorichanaz wrote: Hello, I foolishly deleted a previous email regarding this question. I have several channels (2,3,&4) which the signal is only present on the right master output. (with pan pot set fully to the right and up to center) Once pan is turned to the left, the signal disappears. I believe I was originally told to look at the IC. I have not done that yet. Any other suggestions? Thanks, Tom -- Ike Zimbel Zimbel Audio Productions Ltd. Toronto 416-720-0887 "Studio House Calls" - Repairs and upgrades to analog audio equipment including: Amek, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more. ------ You can unsubscribe at anytime by sending an email to mailto:[EMAIL PROTECTED] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to [EMAIL PROTECTED] The Neotek list is lovingly hosted by Catapult Web Development. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek ! Thanks.
