Yes, this is also VERY common on gear made during the initial days of wave soldering. The bigger parts didn't get hot enough and so there were a LOT of cold solder joints.
Cheers, -- Don > I would just add to this that in my experience with the Series II's that I > have worked on, many of the physically larger contacts appear to have > questionable soldering. This would apply mainly to the pots and male Molex > headers. My read on this is that the soldering irons that were used to > manufacture the boards were a bit on the small side. This would have made > them okay for soldering resistors, caps, IC sockets etc. but not so good for > the big stuff. ------ You can unsubscribe at anytime by sending an email to mailto:[EMAIL PROTECTED] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to [EMAIL PROTECTED] The Neotek list is lovingly hosted by Catapult Web Development. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek ! Thanks.
