Help! I need a manual for the Ealn one if anyone can help. Thanks! Terry Terry McInturff President, Terry C. McInturff Guitars, Inc. 919-742-2958 223-A North Chatham Avenue Siler City, NC 27344 USA
--- On Thu, 3/5/09, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Re: NEOTEK: Need a few parts To: [email protected] Date: Thursday, March 5, 2009, 10:01 AM Hi All Just wanted to say thanks for the tips sourcing the parts. Oh and BTW I have a 24trk Stephens tape machine sitting in my studio lounge that need rehoming. It's going to take considerable work to get it up and running but if anyone knows of someone who would be interested in restoring it or even using it for parts we would be open to lowball offers. Thanks again Andy Press Play Studio > Last time I checked (about 6-8 months ago) this mob had equivalents to the > 4 > pole Alps version of the F series switches. http://www.stanler.co.uk/ > > The difference being the newer C&K 4 poles have an operating force of 550N > as opposed to the Alps version of 350N. If you have a newer Elite with the > brown wafer Alps switches (or the late version Toko Schadows just pre > ITT), > have anally retentive tendencies and want to replace like with like then > try > the Stanler switches. If you're anally retentive and a bit cheap you can > swap out the springs to retain the same operating force. If you're not > predisposed to this kind of retention then the C&K's are fine. I tend to > buy > the silver contact sealed version (TB suffix) of the C&K's and shoot .05cc > of stabilant 22A in. Done about 600 this way so far with excellent > results. > > If you feel like spending some cash the P&G RF11 and RF15 pots will fit in > the master section for CR level. The RF15 only just fits and requires some > creative wiring but is built like a tank and tracks really well. I believe > TKD should have something that is equivalent in quality (possibly slightly > better) for less money. > > Brent Punshon > > > >> Hi All >> >> Need a few spare parts for my Elite. Can anyone recommend a source in >> the >> UK or Europe. >> >> I need: >> control room level pot >> L+R master section trim pots >> Some or the flip switches from the channels (pads, rev, phase etc). > > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe neotek" in the message > body. If you have any difficulties, or questions --please send an email to > mailto:[email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any > message or reply sent to the list will be automatically forwarded to all > subscribers. > > Vive Le Neotek! > > Thanks. > ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
