The cable labled "Multitrack in" is a 24 channel snake with
corresponding gold pins (the connector is 3/4 full of gold pins). The
snake labled "Multitrack Out" is 40 channels with all gold pins
intact. I guess I could plug the "Multitrack Out" snake into the
"Buss Outputs" connector on the board and try sending signal to each
track of the recorders to see if all 40 outputs are on the "Buss
Outputs" connector, but logic tells me to open the back of the board
and look to see if the 'Buss Outputs" connector is fully wired. Am I
making sense?!!!  

---- Original Message ----
From: [email protected]
To: [email protected]
Subject: Re: NEOTEK:  Connection Confusion
Date: Wed, 21 Jul 2010 11:48:15 -0400

>Does it look like every slot in the Buss Output connector has a gold
>pin 
>in it? These are 120 pin connectors, so 120 / 3 = 40, so it is
>possible 
>that the Buss and Direct o/ps are all on that one connector.
>iz
>
>On 7/21/2010 11:40 AM, [email protected] wrote:
>> To make it a bit easier, here are the connections under the board:
>>
>> 1 - Master Section Signals
>> 2 - Output of Mic Sources 41-48
>> 3 - Output of Mic Souces 1-40
>> 4 - Spare (empty slot)
>> 5 - Aux In 201-240
>> 6 - Aux Out 201-240
>> 7 - Aux In/Out 1-12
>> 8 - Aux In/Out 241-248
>> 9 - Spare (empty slot)
>> 10 - Aux Out 101-140
>> 11 - Aux In/Out 141-148
>> 12 - Buss Outputs
>> 13 - Aux In 101-140
>> 14 - Stereo Line Souces
>> 15 - Out Of Multitrack Tape Machine 1-40
>>
>>
>> ---- Original Message ----
>> From: [email protected]
>> To: [email protected]
>> Subject: Re: NEOTEK:  Connection Confusion
>> Date: Wed, 21 Jul 2010 15:08:10 -0000
>>
>>    
>>> Hey Ike,
>>>   I don't see any connections on the board for additional direct
>>> outs. There are a ton of connections for the Aux ins/outs (I have
>the
>>> huge snake for that), but outside of those there's only a
>connection
>>> for "stereo line sources" and "Output of Mic Sources 41-48". There
>>> are 2 empty slots labled "Spare". The snake I have is labled
>>> "Multitrack in 1-24", so I might just have to repatch to the
>second
>>> recorder when I get to track 25. Any suggestions?
>>>
>>> Dave
>>>
>>> ---- Original Message ----
>>> From: [email protected]
>>> To: [email protected]
>>> Subject: Re: NEOTEK:  Connection Confusion
>>> Date: Wed, 21 Jul 2010 10:31:51 -0400
>>>
>>>      
>>>> The Buss Outs are your first 26 sends to "tape". Channels 27-40
>are
>>>> direct outs. There should be a 2nd EDAC with those channels on
>it.
>>>> iz
>>>>
>>>> On 7/21/2010 9:56 AM, [email protected] wrote:
>>>>        
>>>>> Hey guys,
>>>>>     Here's another freshman question. My 93 Elite is 40 x 26 x
>8. I
>>>>> understand the connection for "Out of Multitrack Tape Machine
>>>>>          
>>>> 1-40".
>>>>        
>>>>> That will let me bring back 40 tracks from my 2 Alesis HD24
>>>>> recorders. I'm a bit confused about sending the signal out to
>the
>>>>> HD24s. Do I connect the cable to the "Buss Outputs" connection?
>>>>>          
>>>> Since
>>>>        
>>>>> the board is a 26 buss, do I only have 26 sends out to the
>inputs
>>>>>          
>>>> of
>>>>        
>>>>> the recorders or would the "Buss Outputs" connection send 40
>>>>>          
>>>> signals?
>>>>        
>>>>> I'd like to be able to send out 40 signals if I can without
>having
>>>>>          
>>>> to
>>>>        
>>>>> repatch at the recorder end. I need to reterminate my cable ends
>>>>>          
>>>> with
>>>>        
>>>>> the correct plugs, but I don't want to get into that until I
>know
>>>>> what my limitations are.
>>>>>
>>>>> ------
>>>>>
>>>>> View the list online at:
>>>>>          
>>>> http://www.mail-archive.com/[email protected]
>>>>        
>>>>> You can unsubscribe at anytime by sending an email to
>>>>>          
>>>> mailto:[email protected] with "unsubscribe neotek" in the
>>>> message body. If you have any difficulties, or questions --please
>>>> send an email to mailto:[email protected].
>>>>        
>>>>> The Neotek list is lovingly hosted by Catapult Web. Remember
>that
>>>>>          
>>>> any message or reply sent to the list will be automatically
>>>>        
>>> forwarded
>>>      
>>>> to all subscribers.
>>>>        
>>>>> Vive Le Neotek!
>>>>>
>>>>> Thanks.
>>>>>
>>>>>
>>>>>
>>>>>          
>>>> -- 
>>>> Ike Zimbel
>>>> Zimbel Audio Productions Ltd.
>>>> Toronto
>>>> 416-720-0887
>>>>
>>>> "Studio House Calls". Authorized Warranty service for Allen&  
>Heath,
>>>> Clear-Com, Drawmer, Soundcraft, SPL and Yamaha. Repairs and
>upgrades
>>>> to analog audio equipment including: AMEK, dbx, Neve, Neotek,
>MCI,
>>>> Soundcraft and more. Ask about our RF Frequency co-ordination
>>>> services!
>>>> www.zimbelaudio.com
>>>>
>>>> ------
>>>>
>>>> View the list online at:
>>>> http://www.mail-archive.com/[email protected]
>>>>
>>>> You can unsubscribe at anytime by sending an email to
>>>> mailto:[email protected] with "unsubscribe neotek" in the
>>>> message body. If you have any difficulties, or questions --please
>>>> send an email to mailto:[email protected].
>>>>
>>>> The Neotek list is lovingly hosted by Catapult Web. Remember that
>>>>        
>>> any
>>>      
>>>> message or reply sent to the list will be automatically forwarded
>to
>>>> all subscribers.
>>>>
>>>> Vive Le Neotek!
>>>>
>>>> Thanks.
>>>>        
>>>
>>> ------
>>>
>>> View the list online at:
>>> http://www.mail-archive.com/[email protected]
>>>
>>> You can unsubscribe at anytime by sending an email to
>>> mailto:[email protected] with "unsubscribe neotek" in the
>>> message body. If you have any difficulties, or questions --please
>>> send an email to mailto:[email protected].
>>>
>>> The Neotek list is lovingly hosted by Catapult Web. Remember that
>any
>>> message or reply sent to the list will be automatically forwarded
>to
>>> all subscribers.
>>>
>>> Vive Le Neotek!
>>>
>>> Thanks.
>>>      
>>
>> ------
>>
>> View the list online at:
>http://www.mail-archive.com/[email protected]
>>
>> You can unsubscribe at anytime by sending an email to
>mailto:[email protected] with "unsubscribe neotek" in the
>message body. If you have any difficulties, or questions --please
>send an email to mailto:[email protected].
>>
>> The Neotek list is lovingly hosted by Catapult Web. Remember that
>any message or reply sent to the list will be automatically forwarded
>to all subscribers.
>>
>> Vive Le Neotek!
>>
>> Thanks.
>>
>>
>>    
>
>-- 
>Ike Zimbel
>Zimbel Audio Productions Ltd.
>Toronto
>416-720-0887
>
>"Studio House Calls". Authorized Warranty service for Allen&  Heath,
>Clear-Com, Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades
>to analog audio equipment including: AMEK, dbx, Neve, Neotek, MCI,
>Soundcraft and more. Ask about our RF Frequency co-ordination
>services!
>www.zimbelaudio.com
>
>------
>
>View the list online at:
>http://www.mail-archive.com/[email protected]
>
>You can unsubscribe at anytime by sending an email to
>mailto:[email protected] with "unsubscribe neotek" in the
>message body. If you have any difficulties, or questions --please
>send an email to mailto:[email protected].
>
>The Neotek list is lovingly hosted by Catapult Web. Remember that any
>message or reply sent to the list will be automatically forwarded to
>all subscribers.
>
>Vive Le Neotek!
>
>Thanks.


------

View the list online at: http://www.mail-archive.com/[email protected]

You can unsubscribe at anytime by sending an email to 
mailto:[email protected] with "unsubscribe neotek" in the message body. 
If you have any difficulties, or questions --please send an email to 
mailto:[email protected].

The Neotek list is lovingly hosted by Catapult Web. Remember that any message 
or reply sent to the list will be automatically forwarded to all subscribers.

Vive Le Neotek!

Thanks.

Reply via email to