what is the collective thought on Deoxit D5 on this type of cleaning we have been talking about (to resolve intermittency issues)? i have a can of that on hand actually.
-pete On May 20, 2011, at 11:08 AM, Donald Put wrote: > In addition to all the fine advice Matt and Ike shared, I've found oxidized > IC pins/sockets at times when going through my Series II. I've also found > ICs with bent pins that "curled" up when someone pushed them in but were > touching the socket just enough to get an intermittent connection. Granted, > this is a rare problem but it's one I've seen a few times. When you pull a > channel out, take the time to remove the IC (if they're socketed on a Series > III), clean the pins/sockets, and reinstall. Even if this isn't the > immediate problem it will go a long way to help you avoid more issues in the > long run. > > Cheers, > -- > Don > ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
