From: [EMAIL PROTECTED] > I'm trying to implement my own interfaces table (.1.3.6.1.2.1.2). > ... > but If I do: > > snmpget -v 2c -c PUBLIC mysys RFC1213-MIB::ifIndex.1 > > snmpd dies silently without calling any of the functions in the > subagent. There's nothing in snmpd.log after the startup messages. > Any thoughts...? TIA.
snmpd -Dagentx gives me a log full of blocks like: agentx/master: handle pdu (req=0x314a0d74,trans=0x0,sess=0x6) agentx/master: in register_agentx_list agentx/master: registered ok agentx/master: send response, stat 0 (req=0x314a0d74,trans=0x0,sess=0x6) agentx_build: packet built okay but not indication of any problem. ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ Net-snmp-users mailing list [EMAIL PROTECTED] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users