Thanks Dave, It is working now. I will let you know the procedure I followed and would be useful for others.
Arun Sopanrao Nale
Tata Consultancy Services Limited
Mailto: [EMAIL PROTECTED]
Website: http://www.tcs.com
| Dave Shield <[EMAIL PROTECTED]>
12/13/2005 10:11 PM |
|
[Sorry for the delay in responding to this]
On Fri, 2005-10-07 at 16:08 +0530, [EMAIL PROTECTED] wrote:
> I am trying to snmpwalk on avaya s8300. I am not aware about what to
> do with the mib file g3mib.asn1.
> Can anybody tell me how to use this asn1 file so that I can do
> snmpwalk on the device.
See the FAQ entry
How do I add a MIB to the tools?
> My final aim is to use mrtg to monitor certain parameters on avaya
> s8300.
> I get timeout : no response from the device when I do snmpwalk on the
> same.
Can you see *anything* from this device?
What happens if you try
snmpgetnext .... .1
?
If that times out, then you'll need to look at the access
configuration of the device, *before* you worry about
loading particular MIB files.
Dave
ForwardSourceID:NT00010836
Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you
