Hi,
Thanks for the reply. I see nothing with the snmpgetnext
Node> snmpgetnext -v2c -c public <ip address> ifPhysAddress.1
IF-MIB::ifPhysAddress.2 = STRING:
Regards,
Malathi
--- On Fri, 7/16/10, Mike Ayers <[email protected]> wrote:
From: Mike Ayers <[email protected]>
Subject: RE: ifPhysAddress value shown wrong on NetSNMP client for ifTable
To: "Malathi Panyam" <[email protected]>,
[email protected]
Date: Friday, July 16, 2010, 8:38 AM
> From: Malathi Panyam [mailto:[email protected]]
> Sent: Thursday, July 15, 2010 4:15 PM
> When I tried to get the ifTable using "snmptable" command, I see a
> completely wrong value for "ifPhysAddress". All other values look fine.
What do you see when you get the value of ifPhysAddress using snmpgetnext?
HTH,
Mike
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
