Hello, I have a pair of special radio-devices which support SNMP, but the problem is, that if I snmpwalk those devices, I only see few generic values(sysContact, sysDescr, sysServices etc) and nothing else. Most likely I need MIB files so NMS could know what values can be asked from the radio devices. Is there a possibility to get all the OID's device supports without MIB files as those devices have been out or production for years?
I had a similar problem with one other device. If I snmpwalked the enterprises(1) MIB of this device, there were no replies: [martint@ ~]$ snmpwalk -v 1 -c public -On 10.10.10.1 1.3.6.1.4.1 ..but actually once I got the MIB files from the vendor, it turned out, that there was a 7571 branch with sub-branches under the .1.3.6.1.4.1: [martint@ ~]$ snmpwalk -v 1 -c public -On 10.10.10.1 .1.3.6.1.4.1.7571.100.1.1.2.20.3.12.0 .1.3.6.1.4.1.7571.100.1.1.2.20.3.12.0 = INTEGER: 1 [martint@ ~]$ How do you find out such vendor-specific branches under the ".iso.org.dod.internet.private.enterprises"? regards, Martin ------------------------------------------------------------------------------ Malware Security Report: Protecting Your Business, Customers, and the Bottom Line. Protect your business and customers by understanding the threat from malware and how it can impact your online business. http://www.accelacomm.com/jaw/sfnl/114/51427462/ _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
