I'm trying to install NetBSD 8 on a PC Engines apu2d4 https://www.pcengines.ch/apu2d4.htm
via a USB thumb drive with a NetBSD 8 install image https://cdn.netbsd.org/pub/NetBSD/NetBSD-8.0/images/NetBSD-8.0-amd64-install.img.gz via a serial console where I can get to the welcome screen of the installer image Welcome to the NetBSD/amd64 8.0 installation image =============================================================================== ACPI (Advanced Configuration and Power Interface) should work on all modern and legacy hardware. However if you do encounter a problem while booting, try disabling it and report a bug at http://www.NetBSD.org/. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 0 seconds. Option: [1]: and I press Space and then Enter to start the install, and it shows some numbers with a spinner and then shows 18010904+813996+1283156 [1191264+821120+12847- but then the screen goes blank. Does anyone know what I can try to get this to work? I tried the "no ACPI" and "no ACPI, no SMP" install choices, but that didn't help. The apu2d4 says the serial port baud rate is 115200 which is what I successfully used to communicate with the apu2d4. Will the boot image kernel work with this baud rate? If not, is there a way to change it by dropping to the boot prompt? Or do I need to build a custom kernel with the baud rate set to 115200? Thank you! Lewis
