Hello, folks, I have installed NetBSD once, on a 12 year old laptop. That went without a hitch. I am now trying to install on a newer workstation, and am experiencing the following issue, whether I boot via USB or CD:
- I power on the system, and shortly see the initial NetBSD dialog. On the USB, it gives me two options: 1 to install NetBSD, or 2 to drop to the boot shell (I think). On CD it gives me three options: 1 to boot normally, 2 to boot (in a manner I don't recall), or 3 to drop to the boot shell. - From either, if I select 1, or just let it time out and do it automatically, I see a horizontal line of numbers appear, and then the screen goes black, never to return. There is no flashing of the USB or motion of the CD, and no key combinations cause anything to happen. I just have to push the power button to power it off (which is instantaneous). (My successful install on my laptop was from CD, and after the horizontal line of numbers, I saw normal init messages.) This is some system information that I collected by booting a Gentoo Live USB on the system: Processors: 12 × Intel® Core™ i5-10500 CPU @ 3.10GHz Memory: 16 GiB of RAM (15.4 GiB usable) Graphics Processor: Intel® UHD Graphics 630 Manufacturer: HP Product Name: HP ProDesk 600 G6 Small Form Factor PC System Version: SBKPF NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 3.9G 1 loop /run/rootfsbase sda 8:0 0 476.9G 0 disk ├─sda1 8:1 0 100M 0 part ├─sda2 8:2 0 16M 0 part ├─sda3 8:3 0 476.3G 0 part └─sda4 8:4 0 500M 0 part sdb 8:16 1 57.8G 0 disk ├─sdb1 8:17 1 282K 0 part ├─sdb2 8:18 1 2.8M 0 part ├─sdb3 8:19 1 4G 0 part /run/initramfs/live └─sdb4 8:20 1 300K 0 part sr0 11:0 1 1024M 0 rom Any suggestions on how to get the install going? Thanks!-- Secured with Tuta Mail: https://tuta.com/free-email
