The mvneta itself does not support WOL, but the PHY might.
So pass the calls to the PHY
Signed-off-by: Jingju Hou <houji...@marvell.com>
---
Since v1:
- using phy_dev member in struct net_device
drivers/net/ethernet/marvell/mvneta.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c
b/drivers/net/ethernet/marvell/mvneta.c
index e05e227..78869fa 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3908,6 +3908,25 @@ static int mvneta_ethtool_get_rxfh(struct net_device
*dev, u32 *indir, u8 *key,
return 0;
}
+static void
+mvneta_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ if (dev->phy_dev)
+ return phy_ethtool_get_wol(dev->phy_dev, wol);
+}
+
+static int
+mvneta_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ if (!dev->phy_dev)
+ return -EOPNOTSUPP;
+
+ return phy_ethtool_set_wol(dev->phy_dev, wol);
+}
+
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
@@ -3937,6 +3956,8 @@ static int mvneta_ethtool_get_rxfh(struct net_device
*dev, u32 *indir, u8 *key,
.set_rxfh = mvneta_ethtool_set_rxfh,
.get_link_ksettings = phy_ethtool_get_link_ksettings,
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
+ .get_wol = mvneta_ethtool_get_wol,
+ .set_wol = mvneta_ethtool_set_wol,
};
/* Initialize hw */
--
1.9.1
